Raptor XR Designed for DJI Phantom 4 Pro V2.0
3 sold in last 20 hoursItem Code: G1056TA
Last updated: 06/06/2023
- Maximize performance
- Concurrent dual band 2.4 & 5GHz
- QuickAttach mounting system
- Adjustable tilt of the range extender
Specification:
DJI Phantom 4 Pro V.20 is a model designed for professionals. The basic kit allows for 30 minutes of uninterrupted flight, maximum speed of 72km/h.
With 4Hawks range extender antenna ability to work at 2 frequencies at the same time, DJI Phantom 4 Pro V2.0 receives a great boost to its overall performance, by enhancing signal from oblique antenna signals that ignore noise exceptionally well – this in return allows Phantom 4 Pro V2.0 to maximize its range in noisy areas. What’s more 4Hawks antenna also increases the range of DJI Phantom 4 Pro V2.0 significantly, so the drone can reach even further than ever before.
Last but not least, with 4Hawks range extender, the video quality is always glitch free, thanks to a strong, uninterrupted signal.
Electrical parameters
Port 2: 2.40 – 2.50 GHz & 5.00 – 5.80 GHz
Port 2: 11 dBi (+/- 1 dBi) & 14 dBi (+/- 1 dBi)
Port 1: < 1.50 (max. < 2.00)
Port 2: < 1.50 (max. < 2.00)
Port 2: 70°/40° & 40°/25°
Port 2: Vertical
Port 2: 50 Ω
Mechanical parameters
Mounting: Stainless steel + paint
11.50 x 7.16 x 0.83 inch
Port 2: RP-SMA female
Brand
DJI
Related Products
Item Code: G1056TA
Last updated:06/06/2023
Brand new Gimbal Vibration Absorbing Board (original) for DJI Mavic Pro.
Item Code: G1056TA
Last updated: 07/06/2023
Apply with inspire 1 Remoter controller. Its ergonomic design ease the pressure to the cervical vertebra.
Item Code: G1056TA
Last updated: 06/06/2023
DJI Matrice 200 Part08 Zenmuse XT Gimbal Adapter
The Zenmuse XT Gimbal Adapter is required in order to attach a DJI XT thermal camera to a Matrice 200 series aircraft
*Required to use a Zenmuse XT camera with the 200 series*
Item Code: G1056TA
Last updated: 06/06/2023
Remote controller lanyard holder for DJI Mavic.
Available on backorder
Item Code: G105600G
Last updated: 25-02-2020
Review
Be the first to review “DJI Focus – Handwheel-Inspire 2 Remote Controller CAN Bus Cable (30CM)”
Item Code: G1056TA
Last updated: 06/06/2023
Charge four batteries together.The Mavic Intelligent Flight Battery Charging Hub is designed for use with the Mavic Intelligent Flight Battery. When used with the Mavic Battery Charger, it can charge up to four Intelligent Flight Batteries. The Intelligent Flight Batteries will be charged in sequence according to their power levels, from high to low.
The advanced Charging Hub optimizes charging to improve efficiency. The advanced version charges fully in one hour less than the standard version. When used together with a Phantom 4 charger, the charging time is reduced to 2.5 hours.
Available on backorder
Last updated:06/06/2023
Item Code: G1056T
Improve the Inspire 2’s high-altitude (2500-5000m) performance.
Including a pair of propellers, one clockwise replacement propeller and one counter-clockwise replacement propeller.
The Quick Release Propellers (for high-altitude operations) improve the performance of the Inspire 2 at high-altitude (2500-5000m) locations.
A larger propeller pitch increases the aircraft’s propulsion force at altitudes with thinner air.
Item Code: G1056TA
Last updated: 06/06/2023
Fly and land on any surface.
Available on backorder
Item Code: G1056TA
Last updated: 08/06/2023
- QuickAttach mounting system
- Adjustable tilt of the range extender
- Dedicated pigtails
- No drilling required
Item Code: G1056TA
Last updated: 08/06/2023
- Maximize performance
- Concurrent dual band 2.4 & 5GHz
- No modification to the drone itself
