DJI Mavic Air Car Charger – Part 4
3 sold in last 15 hoursItem Code: G1065HK
Last updated: 08/06/2023
Specification:
- Overview
- The Mavic Air Car Charger is used to charge the Intelligent Flight Battery through the car’s 12 V accessory socket. It comes with low-voltage protection to ensure enough starting battery voltage for the car. Overheating protection will automatically cut off charging if the accessory port exceeds a certain temperature.
- In the Box
- Car Charger × 1
- b
- Specifications
- Product Model: C3S60
Operating Temperature: 41° to 104° F (5° to 40° C)
Input Voltage: 12-16 V (Sedan); Coach not supported
DC Output: 13.2 V; 4.54 A
Charge Time*:
48 min 60° to 104° F (16° to 40° C)
1 hr 37 min 41° to 59° F (5° to 15° C)
*Charging times were tested in a lab environment and should be taken as reference only. -
CompatibilityMavic Air
Mavic Air Battery Charging Hu
Brand
DJI
Related Products
Item Code: G1056TA
Last updated: 06/06/2023
Special sunshade cover for DJI Mavic and Spark remote controller.
Available on backorder
Item Code: G1056TA
Last updated: 06/06/2023
- Concurrent dual band 2.4 & 5GHz
- No modification to the drone itself
- Long range extension without external boosters
- Design does not contain any removable parts
- Complete solution
Available on backorder
Item Code: G1056TA
Last updated: 06/06/2023
Remote control protection bracket for DJI Mavic and DJI Spark.
Available on backorder
Item Code: G1056TA
Last updated: 08/06/2023
- Concurrent dual band 2.4 & 5GHz
- QuickAttach mounting system
- Low loss PTFE antenna array
- No modification to the drone itself
- Long range extension without external boosters
- Design does not contain any removable parts
- Complete solution
Item Code: G1056TA
Last updated: 07/06/2023
Designed specifically for the Osmo, the Intelligent Battery provides packs 980mAh of power and intelligent battery-saving features. Recharge using the Osmo Intelligent Battery Charger.
Item Code: G1056TA
Last updated: 06/06/2023
Charge four batteries together.The Mavic Intelligent Flight Battery Charging Hub is designed for use with the Mavic Intelligent Flight Battery. When used with the Mavic Battery Charger, it can charge up to four Intelligent Flight Batteries. The Intelligent Flight Batteries will be charged in sequence according to their power levels, from high to low.
The advanced Charging Hub optimizes charging to improve efficiency. The advanced version charges fully in one hour less than the standard version. When used together with a Phantom 4 charger, the charging time is reduced to 2.5 hours.
Available on backorder
Item Code: G1056TA
Last updated: 07/06/2023
Apply with inspire 1 Remoter controller. Its ergonomic design ease the pressure to the cervical vertebra.
Item Code: G1056TA
Last updated: 08/06/2023
- QuickAttach mounting system
- Adjustable tilt of the range extender
- Dedicated pigtails
- No drilling required
Item Code: G1056TA
Last updated: 06/06/2023
Brand new Flat Ribbon Gimbal Cable (original) for DJI Mavic Pro.
Last updated: 06/06/2023
Item Code: G1056TA
Specifically made for the Phantom 4 Pro, this ND filter reduces the amount of light coming into the sensor. It gives you the freedom to create your own work by allowing more control of the camera’s aperture, exposure time and sensor sensitivity settings.
Put more simply, the ND filter helps avoid overexposed photos.
The ND4 filter allows 1/4 of incoming light through, equal to a 2-stop filter.
The ND8 filter allows 1/8 of incoming light through, equal to a 3-stop filter.
The ND16 filter allows 1/16 of incoming light through, equal to a 4-stop filter.
Item Code: G105600G
Last updated: 25-02-2020
Review
Be the first to review “DJI Focus – Handwheel-Inspire 2 Remote Controller CAN Bus Cable (30CM)”