DJI Landing Gear Kit for Matrice 100
3 sold in last 10 hours
- Impact Absorbing Rubber Feet
- Tool-Free Installation
- Set of Four
- 4 Pieces
Item Code: G105600G-A
Last updated: 10-08-2020
The Landing Gear Kit for Matrice 100 from DJI features a set of four replacement/upgrade landing gear. Landing pads – or “feet” – are installed at the base of each arm, helping to minimize impact and vibration during landing. Installation it tool-free.
Brand
DJI
Related Products
Item Code: G1056TA
Last updated: 06/06/2023
Brand new Flat Ribbon Gimbal Cable (original) for DJI Mavic Pro.
Item Code: G1056TA
Last updated: 06/06/2023
Fly and land on any surface.
Available on backorder
Item Code: G1056TA
Last updated: 06/06/2023
Admission package for the remote controller.
Available on backorder
Item Code: G1056TA
Last updated: 06/06/2023
DJI Matrice 200 Part08 Zenmuse XT Gimbal Adapter
The Zenmuse XT Gimbal Adapter is required in order to attach a DJI XT thermal camera to a Matrice 200 series aircraft
*Required to use a Zenmuse XT camera with the 200 series*
Item Code: G1056TA
Last updated: 06/06/2023
Remote controller lanyard holder for DJI Mavic.
Available on backorder
Item Code: G1056TA
Last updated: 06/06/2023
DJI TB55 Battery (single battery)
Item Code: G1065TA
Last updated: 07/06/2023
The Osmo X5 Adapter allows the Zenmuse X5 Series gimbal and camera to be used with the Osmo handle.
Item Code: G1056TA
Last updated: 07/06/2023
Apply with inspire 1 Remoter controller. Its ergonomic design ease the pressure to the cervical vertebra.
Item Code: G1056TA
Last updated: 06/06/2023
- Concurrent dual band 2.4 & 5GHz
- No modification to the drone itself
- Long range extension without external boosters
- Design does not contain any removable parts
- Complete solution
Available on backorder
Item Code: G1056TA
Last updated: 06/06/2023
The Inspire 2 remote contoller can be charged by connecting it to an Inspire 2 Intelligent Flight Battery using this cable.
Item Code: G1056TA
Last updated: 08/06/2023
- Maximize performance
- Concurrent dual band 2.4 & 5GHz
- QuickAttach mounting system
- Adjustable tilt of the range extender
- Dedicated pigtails
Last updated: 06/06/2023
Item Code: G1056TA
Specifically made for the Phantom 4 Pro, this ND filter reduces the amount of light coming into the sensor. It gives you the freedom to create your own work by allowing more control of the camera’s aperture, exposure time and sensor sensitivity settings.
Put more simply, the ND filter helps avoid overexposed photos.
The ND4 filter allows 1/4 of incoming light through, equal to a 2-stop filter.
The ND8 filter allows 1/8 of incoming light through, equal to a 3-stop filter.
The ND16 filter allows 1/16 of incoming light through, equal to a 4-stop filter.