Raptor SR Designed for DJI Inspire 2
1 sold in last 17 hoursItem Code: G1056TA
Last updated:08/06/2023
- Concurrent dual band 2.4 & 5 GHz
- Quick Attach mounting system
- Adjustable tilt of the range extender
Specification
DJI Inspire 2 is one of newer models made for professional users. It is definitely a flagship of professional models currently available on the market. The drone’s body is made from magnesium alloys. Cameras included are easily interchangeable with quality up to 5.2k. The basic kit allows for up to 30 minutes of uninterrupted flight, maximum speed of 90km/h.
4Hawks antenna significantly increases  the range of Dji Inspire 2, so the drone can reach even further than ever before. Additionally, the strength of the signal is improved, especially in noisy areas.
Last but not least, with 4Hawks range extender, the video quality is always glitch free, thanks to a strong, uninterrupted signal, that is supported by two frequencies operating at the same time.
Specification
Electrical parameters
Port 2:  2.40 – 2.50 GHz & 5.00 – 5.80 GHz
Port 2:  8 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi)
Port 2:Â Â < 1.50Â (max. < 2.15)
Port 2:  90°/65° & 55°/55°
Port 2:Â Â Vertical
Port 2:  50 Ω
Mechanical parameters
Mounting:Â Â Stainless steel + paint
6.34 x 3.60 x 0.67 inch
Port 2:Â Â RP-SMA female
Brand
DJI
Related Products
Last updated: 06/06/2023
Item Code: G1056TA
Specifically made for the Phantom 4 Pro, this ND filter reduces the amount of light coming into the sensor. It gives you the freedom to create your own work by allowing more control of the camera’s aperture, exposure time and sensor sensitivity settings.
Put more simply, the ND filter helps avoid overexposed photos.
The ND4 filter allows 1/4 of incoming light through, equal to a 2-stop filter.
The ND8 filter allows 1/8 of incoming light through, equal to a 3-stop filter.
The ND16 filter allows 1/16 of incoming light through, equal to a 4-stop filter.
Last updated:06/06/2023
Item Code: G1056T
Improve the Inspire 2’s high-altitude (2500-5000m) performance.
Including a pair of propellers, one clockwise replacement propeller and one counter-clockwise replacement propeller.
The Quick Release Propellers (for high-altitude operations) improve the performance of the Inspire 2 at high-altitude (2500-5000m) locations.
A larger propeller pitch increases the aircraft’s propulsion force at altitudes with thinner air.
Item Code: G1056TA
Last updated: 06/06/2023
Admission package for the remote controller.
Available on backorder
Item Code: G1056TA
Last updated: 06/06/2023
Remote controller lanyard holder for DJI Mavic.
Available on backorder
Item Code: G105600G
Last updated: 25-02-2020
- Covers the propellers.
- Aids flight safety, protecting people and objects from spinning propellers.
- Small, lightweight, easy to mount, and detach.
Item Code: G1056TA
Last updated: 07/06/2023
- The Zenmuse X5R SSD is a high performance storage device designed for the Zenmuse X5R.
Available on backorder
Item Code: G1056TA
Last updated: 06/06/2023
- Maximize performance
- Concurrent dual band 2.4 & 5GHz
- QuickAttach mounting system
- Adjustable tilt of the range extender
Available on backorder
Item Code: G1056TA
Last updated: 08/06/2023
- Maximize performance
- Concurrent dual band 2.4 & 5GHz
- No modification to the drone itself
Item Code: G1056TA
Last updated: 06/06/2023
Charge four batteries together.The Mavic Intelligent Flight Battery Charging Hub is designed for use with the Mavic Intelligent Flight Battery. When used with the Mavic Battery Charger, it can charge up to four Intelligent Flight Batteries. The Intelligent Flight Batteries will be charged in sequence according to their power levels, from high to low.
The advanced Charging Hub optimizes charging to improve efficiency. The advanced version charges fully in one hour less than the standard version. When used together with a Phantom 4 charger, the charging time is reduced to 2.5 hours.
Available on backorder
Item Code: G1056TA
Last updated: 06/06/2023
Admission package for the battery.
Available on backorder
Item Code: G1056TA
Last updated: 06/06/2023
- Three-Axis Motorized Gimbal Stabilizer
- Designed for Mirrorless Cameras
- One-Handed Operation, 4.4 lb Max. Load
- Force Mobile Smartphone Control
Available on backorder