Raptor SR Designed for DJI Matrice series

Item Code: G1056TA
Last updated: 08/06/2023
- QuickAttach mounting system
- Adjustable tilt of the range extender
- Dedicated pigtails
- No drilling required
Specification
DJI Matrice is a model that is best known for its industrial usage with a big payload with long flight time. the drone is equipped with exceptional obstacle and aircraft detection systems. It is also possible to operate the drone with two controllers. The basic kit allows for up to 38 minutes of uninterrupted flight, maximum speed of 65km/h.
4Hawks antenna for DJI Matrice model is operating in 2.4GHz with 9dBi gain and 5.8Gz with 10 dBi Gain additional antenna installed inside controller working in 5GHz frequency that allows operating the drone with 2 controllers. Entire construction is 100% UV protected to assure longevity of the equipment. Additionally, part of the construction is made of aluminum to make the whole construction as light as possible. Mounting is made of stainless steel for rock solid stability.
Modifying the controller might require an assistance of a professional.
Specification
Electrical parameters
Port 2:  2.40 – 2.50 GHz & 5.00 – 5.80 GHz
Port 2:  9 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi)
Port 2:Â Â < 1.50Â (max. < 2.30)
Port 2: 90°/65° & 55°/55°
Port 2:Â Â Vertical
Port 2:  50 Ω
Mechanical parameters
Mounting:Â Â Stainless steel + paint
6.34 x 3.60 x 0.67 inch
Port 2:Â Â RP-SMA female
Related Products
Last updated: 06/06/2023
Item Code: G1056TA
Specifically made for the Phantom 4 Pro, this ND filter reduces the amount of light coming into the sensor. It gives you the freedom to create your own work by allowing more control of the camera’s aperture, exposure time and sensor sensitivity settings.
Put more simply, the ND filter helps avoid overexposed photos.
The ND4 filter allows 1/4 of incoming light through, equal to a 2-stop filter.
The ND8 filter allows 1/8 of incoming light through, equal to a 3-stop filter.
The ND16 filter allows 1/16 of incoming light through, equal to a 4-stop filter.
Item Code: G1056TA
Last updated: 06/06/2023
Brand new Flat Ribbon Gimbal Cable (original) for DJI Mavic Pro.
Item Code: G1056TA
Last updated: 06/06/2023
Dimensions: 860 mm × 560 mm × 455 mm
Net Weight: 10.5 kg
Max Internal Load: 18 kg
Compatible Batteries: TB47S / TB48S / TB47D / TB48D Intelligent Flight Battery × 18 pcs
Compatible Chargers: MC6S600 (DJI Hex Charger) × 2 pcs
Operating Temperature: -10° to 50 ° C
Item Code: G1056TA
Last updated: 08/06/2023
- Maximize performance
- Concurrent dual band 2.4 & 5GHz
- No modification to the drone itself
Item Code: G105600G
Last updated: 25-02-2020
- Covers the propellers.
- Aids flight safety, protecting people and objects from spinning propellers.
- Small, lightweight, easy to mount, and detach.
Item Code: G1056TA
Last updated: 06/06/2023
DJI Matrice 200 Part08 Zenmuse XT Gimbal Adapter
The Zenmuse XT Gimbal Adapter is required in order to attach a DJI XT thermal camera to a Matrice 200 series aircraft
*Required to use a Zenmuse XT camera with the 200 series*
Item Code: G1056TA
Last updated: 06/06/2023
- Just connect your tablet with DJI Go App to DJI Mavic and start shooting as a Pro!
Available on backorder
Item Code: G1056TA
Last updated: 06/06/2023
Charge four batteries together.The Mavic Intelligent Flight Battery Charging Hub is designed for use with the Mavic Intelligent Flight Battery. When used with the Mavic Battery Charger, it can charge up to four Intelligent Flight Batteries. The Intelligent Flight Batteries will be charged in sequence according to their power levels, from high to low.
The advanced Charging Hub optimizes charging to improve efficiency. The advanced version charges fully in one hour less than the standard version. When used together with a Phantom 4 charger, the charging time is reduced to 2.5 hours.
Available on backorder
Item Code: G1056TA
Last updated:08/06/2023
- Concurrent dual band 2.4 & 5 GHz
- Quick Attach mounting system
- Adjustable tilt of the range extender
Item Code: G1056TA
Last updated: 06/06/2023
Max 30 mins flight time.
Professional aerial imaging benefits from longer flight times. The Phantom 4 Pro has a maximum flight time of 30 minutes, providing more time in the air to capture the perfect shot. The DJI GO app shows battery lifetime and calculates remaining flight times according to distance traveled and more. It will give alerts when it reaches a minimum safe amount required for a safe journey back to the takeoff point. An advanced battery management system is also in place to prevent overcharging and over draining. When placed in longer term storage, batteries will discharge power to maintain good health.
Available on backorder
Item Code: G1056TA
Last updated: 06/06/2023
Fly and land on any surface.
Available on backorder
Item Code: G1056TA
Last updated: 06/06/2023
Special sunshade cover for DJI Mavic and Spark remote controller.
Available on backorder