Raptor SR Designed for DJI Phantom 4 Pro V2.0
3 sold in last 14 hoursItem Code: G1056TA
Last updated: 08/06/2023
- Concurrent dual band 2.4 & 5GHz
- QuickAttach mounting system
- Low loss PTFE antenna array
- No modification to the drone itself
- Long range extension without external boosters
- Design does not contain any removable parts
- Complete solution
Specification
DJI Phantom 4 Pro v2.0 is a improved version of Phantom 4 Pro. The basic kit allows for 33 minutes of uninterrupted flight.
With 4Hawks range extender antenna ability to work at 2 frequencies at the same time, DJI Phantom 4 Pro receives a great boost to its overall performance, by enhancing signal from oblique antenna signals that ignore noise exceptionally well – this in return allows Phantom 4 Pro to maximize its range in noisy areas. What’s more 4Hawks antenna also increases the range of DJIPhantom 4 Pro significantly, so the drone can reach even further than ever before.
4Hawks antenna for DJI Phantom 4 Pro model is operating in 2.4GHz with 8dBi gain as well as in 5GHz with 10 dBi gain. Both antenna frequencies allow simultaneous work. Entire construction is 100% UV protected to assure longevity of the equipment. Additionally, part of the construction is made of aluminum to make the whole construction as light as possible. Mounting is made of stainless steel for rock solid stability. Mounting the range extender is easy and doesn’t require professional assistance. The entire set is lightweight and uniform (without any loose equipment pieces). Changing the direction of the antenna shouldn’t cause any difficulties, as the system was designed in a way that allows quick position change with just a single “click” to 5 different positions. This way you can be sure that you do not lose the connection with your drone.
Specification
Electrical parameters
Port 2: 2.40 – 2.50 GHz & 5.00 – 5.80 GHz
Port 2: 8 dBi (+/- 1 dBi) & 10 dBi (+/- 1 dBi)
Port 2: < 1.50 (max. < 2.15)
Port 2: 90°/65° & 55°/55°
Port 2: Vertical
Port 2: 50 Ω
Mechanical parameters
Mounting: Stainless steel + paint
6.34 x 3.60 x 0.67 inch
Port 2: RP-SMA female
Brand
DJI
Related Products
Last updated: 06/06/2023
Item Code: G1056TA
Specifically made for the Phantom 4 Pro, this ND filter reduces the amount of light coming into the sensor. It gives you the freedom to create your own work by allowing more control of the camera’s aperture, exposure time and sensor sensitivity settings.
Put more simply, the ND filter helps avoid overexposed photos.
The ND4 filter allows 1/4 of incoming light through, equal to a 2-stop filter.
The ND8 filter allows 1/8 of incoming light through, equal to a 3-stop filter.
The ND16 filter allows 1/16 of incoming light through, equal to a 4-stop filter.
Item Code: G1056TA
Last updated: 06/06/2023
Special sunshade cover for DJI Mavic and Spark remote controller.
Available on backorder
Item Code: G1056TA
Last updated: 08/06/2023
- Maximize performance
- Concurrent dual band 2.4 & 5GHz
- QuickAttach mounting system
- Adjustable tilt of the range extender
- Dedicated pigtails
Item Code: G1065TA
Last updated: 07/06/2023
The Osmo X5 Adapter allows the Zenmuse X5 Series gimbal and camera to be used with the Osmo handle.
Item Code: G1056TA
Last updated:06/06/2023
Brand new Gimbal Vibration Absorbing Board (original) for DJI Mavic Pro.
Item Code: G1056TA
Last updated: 06/06/2023
- Concurrent dual band 2.4 & 5GHz
- No modification to the drone itself
- Long range extension without external boosters
- Design does not contain any removable parts
- Complete solution
Available on backorder
Item Code: G1056TA
Last updated: 06/06/2023
Brand new Flat Ribbon Gimbal Cable (original) for DJI Mavic Pro.
Item Code: G1056TA
Last updated: 06/06/2023
Fly and land on any surface.
Available on backorder
Item Code: G1056TA
Last updated: 06/06/2023
The Inspire 2 remote contoller can be charged by connecting it to an Inspire 2 Intelligent Flight Battery using this cable.
Last updated:06/06/2023
Item Code: G1056T
Improve the Inspire 2’s high-altitude (2500-5000m) performance.
Including a pair of propellers, one clockwise replacement propeller and one counter-clockwise replacement propeller.
The Quick Release Propellers (for high-altitude operations) improve the performance of the Inspire 2 at high-altitude (2500-5000m) locations.
A larger propeller pitch increases the aircraft’s propulsion force at altitudes with thinner air.
Item Code: G1056TA
Last updated: 06/06/2023
Admission package for the remote controller.
Available on backorder
